Find out why stucco is pulling away before loose material becomes a leak or falling hazard.
Bulging, loose or hollow stucco means the finish is no longer behaving as one bonded wall. The cause may be impact, corroded lath, moisture, poor original bond, substrate movement or layers that were applied over an unstable surface. We define the extent before choosing a patch.
Our crew approaches the work as an exterior wall repair, not as a cosmetic cover-up. The estimate identifies the repair boundary, preparation, material layers and finish plan so the property owner can compare scope rather than only a bottom-line number.
Request an on-site estimate
Freeze exposure can worsen a wall that is already wet and detached. Strong wind also turns loose pieces into a safety concern. We prioritize stabilization when the area is above a door, sidewalk or parking space.
Scope decision: A small bulge may be localized, but a broad hollow elevation often costs less to repair correctly as a larger panel than as a chain of small patches.
Secure the area and remove immediate falling hazards.
Sound and mark the wall to identify stable boundaries.
Open the damaged section and document lath, paper and substrate.
Correct moisture or attachment problems and rebuild the wall layers.
Blend the finish across a boundary that will not leave a thin fragile edge.
Bulging, loose or hollow stucco means the finish is no longer behaving as one bonded wall. The cause may be impact, corroded lath, moisture, poor original bond, substrate movement or layers that were applied over an unstable surface. We define the extent before choosing a patch.
During the site visit we do not limit the review to the most obvious mark. The surrounding wall tells us whether the visible condition is isolated or part of a larger transition, moisture or bond problem.
Freeze exposure can worsen a wall that is already wet and detached. Strong wind also turns loose pieces into a safety concern. We prioritize stabilization when the area is above a door, sidewalk or parking space.
Contractor note: A small bulge may be localized, but a broad hollow elevation often costs less to repair correctly as a larger panel than as a chain of small patches.
Secure the area and remove immediate falling hazards.
Sound and mark the wall to identify stable boundaries.
Open the damaged section and document lath, paper and substrate.
Correct moisture or attachment problems and rebuild the wall layers.
Blend the finish across a boundary that will not leave a thin fragile edge.
A useful estimate should let the property owner understand what is being removed, rebuilt and finished. It should also state which discoveries could change the scope after damaged material is opened.
Do not press on or pry bulging stucco yourself. Keep people away from overhead loose areas and contact us promptly if pieces have started falling.
Our standard: We leave the customer with the repair boundary, finish strategy and maintenance items explained in plain language.
A useful quote starts with the wall, not a generic square-foot number. Before we recommend a repair, we need to understand the symptom, the surrounding construction, the finish expectations and the conditions that could be hidden behind the surface. That is especially important for loose and bulging stucco repair reno, because two areas that look similar in a phone photo can require very different preparation once bond, moisture, lath, substrate and access are considered.
Show hollow sound beyond the visible bulge, rust staining or exposed metal and the surrounding wall in separate views. One close-up alone can make a crack or damaged spot look larger or smaller than it actually is, so context matters. If the problem is above a roof, behind landscaping or near a property line, include that access condition as well.
Our price is based on the work required to leave a stable, weather-conscious and visually intentional repair. The visible square footage is only one part of that calculation. Access, demolition, wall layers, reinforcement, cure time, protection and the size of the finish blend can affect labor and material even when the damaged spot itself is small.
A small bulge may be localized, but a broad hollow elevation often costs less to repair correctly as a larger panel than as a chain of small patches.
We separate required repair work from optional appearance improvements. That allows an owner to understand what protects the wall now, what improves uniformity, and what may be deferred without hiding a known failure.
Stucco often has to be opened back to sound material. A crack can continue beneath paint, a hollow area can extend beyond the visible bulge, and water can travel from a window, roof or penetration before it appears on the face of the wall. We explain those possibilities before work begins and show the owner if concealed conditions change the original assumption.
Natural stopping points also matter. A corner, control joint, trim band, downspout, window return or full architectural panel can create a cleaner and more durable ending than a small irregular patch in the middle of an uninterrupted wall.
Our stucco crew performs the work described in the estimate. The same contractor responsibility carries from the initial wall review through preparation, application, finish work and cleanup.
Material compatibility matters as much as appearance. Cement plaster, acrylic finish, existing coatings, sealants and repair compounds do not all move or absorb moisture the same way. We choose the repair approach around the existing assembly and the condition we find rather than using one bagged product for every wall.
On an occupied home, we discuss windows, pets, gates, landscaping, parking and the times when noise or access will matter. On commercial property, the plan may also include pedestrian routing, tenant entrances, signage, loading zones and phased work so the building can continue operating safely.
Reno sun, wind and overnight temperatures can change working time and cure. We schedule each stage around the material requirements and the exposure of the elevation. Moving too quickly can produce shrinkage, weak bond or visible variation, while leaving an opened wall unprotected creates a different risk.
Color and texture expectations are reviewed before the prominent finish work begins. Existing stucco has aged in the sun and weather, so a technically sound repair can still be visible. We explain when a local match is reasonable and when a wider blend, architectural break, full elevation coating or larger resurfacing area will create a better result.
After completion, we explain what to watch. Do not press on or pry bulging stucco yourself. Keep people away from overhead loose areas and contact us promptly if pieces have started falling. That guidance is part of the repair because sprinklers, failed sealant, roof runoff or unaddressed movement can damage even well-installed stucco over time.
We inspect the visible condition, surrounding bond, wall transitions, moisture clues and the clean repair boundary before preparing the written scope.
Photos help us understand the project and prepare for the visit. Final price depends on wall system, access, repair depth, finish and any concealed conditions found after opening damaged material.
We sample texture and discuss color expectations before prominent finish work. A larger blend area or full-elevation coating may be recommended when a small spot would remain visible.
Yes. We provide stucco service across Reno, Sparks, Spanish Springs, Sun Valley, Verdi, Washoe County, Carson City and surrounding areas based on project scope and scheduling.
Send your name, ZIP code, project details and either a phone number or email. Photos are optional but helpful.